I've done a lot of reading of past posts. I am considering upgrading our HMI's on our two MarkV steam turbine controllers and EX2000. They were installed around 2001 and have WinNT4.0 with 2 HMI's, 2 viewers, and 1 historian. I believe I have two never used spare HMI "black boxes" from around 2000 at another site that can keep us up and running if one of the 10yr old units decides to croak. I've been keeping up with harddrive backups etc. My worry is hardware failure.
I would like feedback from people that have installed aftermarket solutions. I only am considering systems that would directly communicate with the MkV controller....so from my research, this would be:
1) GCI from Global Controls
2) TMOS from ITS
3) ITC from CSE Engineering
Thank you.
I would like feedback from people that have installed aftermarket solutions. I only am considering systems that would directly communicate with the MkV controller....so from my research, this would be:
1) GCI from Global Controls
2) TMOS from ITS
3) ITC from CSE Engineering
Thank you.