We have PLC control system controlling debris filter process and we are going to replace that PLC (Allen Bradley) with yokogawa centum VP DCS. there is one Allen Bradley touch panel (2711-K6C9) in the field.
Is it possible to interface (RS232 baudrate=19200 and node address is 3 and the max.node addressing is 31) to YOKOGAWA DCS.

thank you

 

I can't imagine why you would want to mess with a working system by cobbling up it up in this way.

If you are going to replace the PLC control system, just replace the whole thing. I doubt there is any way to reuse the Panelview afterwards.