R
Hello Everyone,
Request any help on the following:
There's a Furnace Stack and we have to measure Flue Flow thru the Stack at a height of 20 meters....!!! We have following Measurements being recorded in DCS:
1) Fuel Gas Flow to the Burner
2) Fuel Gas Pressure in Fuel Gas Header
3) Fuel Gas Temperature in Fuel Gas Header
4) %Oxygen in the Final Flue thru the Stack
Based on the above values, is it possible to derive the instantaneous Mass Flow Value of Flue Gases thru the Stack in Kilograms per unit Time
au revoir
Rahul
Request any help on the following:
There's a Furnace Stack and we have to measure Flue Flow thru the Stack at a height of 20 meters....!!! We have following Measurements being recorded in DCS:
1) Fuel Gas Flow to the Burner
2) Fuel Gas Pressure in Fuel Gas Header
3) Fuel Gas Temperature in Fuel Gas Header
4) %Oxygen in the Final Flue thru the Stack
Based on the above values, is it possible to derive the instantaneous Mass Flow Value of Flue Gases thru the Stack in Kilograms per unit Time
au revoir
Rahul