O
Dear Sirs,
We are using a formulation based on PARABOLA i.e. Y= aX(2)+bX for the contours of the camber.
i.e. Roll 2000 mm Length, Camber .9 mm.
Is it correct to follow on the lathe machine.
Regards,
Onkar S Bhandari
We are using a formulation based on PARABOLA i.e. Y= aX(2)+bX for the contours of the camber.
i.e. Roll 2000 mm Length, Camber .9 mm.
Is it correct to follow on the lathe machine.
Regards,
Onkar S Bhandari