Printed Circuit Board Relays...

K

Thread Starter

Kevin

I have 2 PCB relays. Where can I find exact replacements or a cross reference? Relays are marked as follows. Who is CAC?

CAC
1=37259
011-10312-00
33C63D12
10A 120VAC
614

CAC
1=37260
011-10313-00
33A63D12
10A 120VAC
612

Thanks
 
B
>I have 2 PCB relays. Where can I find exact replacements or
>a cross reference? Relays are marked as follows. Who is CAC?

If this is still relevant after 14 years, I have both of these relays on an old, broken BCB. I can't find any information on them either. In order to replace them, measure the voltage applied to the coil, and if possible, also the amperage it takes to switch it.

A valid replacement would support the same coil voltage, require equal or less amperage (coil watts/volts if only watts provided), and have the same voltage and amperage rating for the switch (10A 120VAC, in this case).

I only say equal or less amperage because in some circumstances, primarily with micro-controllers, the current device may already be at the output limit.

Hope that helps.
 
Top