Hi all,

I need the manual of the 1770-T11 Hand Held programmer, this hand held is used to program AB PLC-2 Family. I have been searching at http://www.ab.com but without success.

Hope anyone can help me!!!

Thanks in advance!

Gregorio Cavazos C.
[email protected]

 

Greg---

This manual, 1770-6.5.2 January 1985, has apparently never been scanned into the electronic document world. It's not at the Allen-Bradley websites, and I couldn't find it on the Internet. (I also couldn't find it
in my garage, the gravesite of literally thousands of old manuals. Anyone need two cases of 1985 VMS documentation?) You can purchase a hardcopy at http://www.theautomationbookstore.com, but you indicated an urgent need and I suspect it would take a couple of weeks for the Automation Bookstore to get it to you.

More importantly, I doubt that this manual is what you really need. The T11 is only a data access terminal, not a programming terminal. You can't observe or modify ladder logic with a T11.

I haven't touched a T11 for nearly 20 years, but as I recall, the operation was reasonably intuitive. If you know the PLC address you want to work with, the T11 simply helps you access it and modify it.

On the other hand, if you need a programming terminal, then the T11 isn't your solution.

Sorry the information isn't very helpful.

Larry Lawver
Rexel / Central Florida