A-B PanelView Plus 1000 - Modbus Polling

R

Thread Starter

RyanClayton

I have 3 PanelView Plus 1000s and want to collect data from them using a Modbus Master. I have been in contact with Rockwell and they have passed on information regarding KepServer Enterprise drivers on the PVP.

I am looking to use an independent Modbus Master (not a PC that I can install KepServer on). I simply program in the Modbus address, baud rate, parity and modbus registers and it sends the request to the defined address.

Is this possible? How do I do this?

Thanks,
 
J

Jerry Miille

I am pretty certain that the PanelView Plus 1000 has a DB-9 connector that supports DF-1 Full-Duplex serial communication. If, so, you could use our Omnii-Comm product to provide Modbus communication.

Please contact us direct at http://www.miille.com/ And look at our Omnii-Comm product offerings. This is a stand-alone, DIN rail mounted module that supports a wide range of serial communication protocols, DF-1 and Modbus being just two of them.

Jerry Miille
 
R
So the device we usually use is the Obvius AcquiSuite A8810. It works great for our other implementations, but I just want to be sure that I can poll the A-B PanelView Plus.

Do I need to purchase the Kepware drivers to poll this or will it work without?
 
J

Jerry Miille

Ryan,

This is possibly a very late response to your post but we offer multiple solutions for your application. Please visit us at http://miille.com to view our Omnii-Comm product offerings and please contact us for more information.

We can provide the function that you are requesting.

Thanks,
Jerry Miille
 
Top