A-B Remote I/O Interface

A

Thread Starter

Aly Mawji

Hi All,

DataLink currently has both a freestanding and ISA bus interface card for A-B's Remote I/O. The DL2000-KFR and DL-PC operate in Adapter (Slave)
mode; however, the Scanner (Master) version is currently in development. DataLink would like to offer a demo unit to the development team at
LinuxPLC for testing and development purposes. Both units use the standard serial DF1 driver, and can be configured via our DOS or Windows software. It is also possible to configure them using our debug commands in a terminal program. Please let us know if there is any interest in this. I can be contacted directly at this email address.

Regards,

Aly Mawji
---
DataLink Technologies, Inc.
www.dltech.net
[email protected]
(800) 851-7883 x 23


_______________________________________________
LinuxPLC mailing list
[email protected]
http://linuxplc.org/mailman/listinfo/linuxplc
 
S
On Wed Jan 19 15:53:22 2000 Aly Mawji wrote...
>
>Hi All,
>
>DataLink currently has both a freestanding and ISA bus interface card for
>A-B's Remote I/O. The DL2000-KFR and DL-PC operate in Adapter (Slave)
>mode; however, the Scanner (Master) version is currently in development.
> DataLink would like to offer a demo unit to the development team at
>LinuxPLC for testing and development purposes. Both units use the standard
>serial DF1 driver, and can be configured via our DOS or Windows software.
> It is also possible to configure them using our debug commands in a
>terminal program. Please let us know if there is any interest in this. I
>can be contacted directly at this email address.
>
>

Sounds neat. So I assume it looks like a serial port to the backplane?

If so it should be easy to wrtie a configuration engine for.


--
Stan Brown [email protected] 843-745-3154
Westvaco
Charleston SC.

_______________________________________________
LinuxPLC mailing list
[email protected]
http://linuxplc.org/mailman/listinfo/linuxplc
 
Top