J
<p>I want to configure a split range control function in Honeywell TPS system.
<p>I know that if I turn the Output Characterization (OPCHAR) "ON" then I can characterize the output value. However, in TPS system the value of OPOUT must be increased.
If I want to configure the following function what should I do?
<pre>
Ctrl Out Valve A Open Valve B Open
0% 0% 0%
10% 0% 100%
100% 100% 0%
</pre>
<p>Thanks for your kindly help.
<p>Jeff
<p>I know that if I turn the Output Characterization (OPCHAR) "ON" then I can characterize the output value. However, in TPS system the value of OPOUT must be increased.
If I want to configure the following function what should I do?
<pre>
Ctrl Out Valve A Open Valve B Open
0% 0% 0%
10% 0% 100%
100% 100% 0%
</pre>
<p>Thanks for your kindly help.
<p>Jeff