C
Hi,
BACnet is a protocol used for Building Automation which might be a useful addition to the Linux PLC.
I have written a gateway for BACnet, Modbus, Carrier and Atlas systems which runs on Windows NT and I am considering moving this onto Linux. It's been written in C++ and can be found at http://www.scadaengine.com
If I adopt the same principle, then you could use the PLC as a gateway as well as a controller.
If anyone thinks it might be useful, then let me know and I'll try and move my code over.
Chris
_______________________________________________
LinuxPLC mailing list
[email protected]
http://linuxplc.org/mailman/listinfo/linuxplc
BACnet is a protocol used for Building Automation which might be a useful addition to the Linux PLC.
I have written a gateway for BACnet, Modbus, Carrier and Atlas systems which runs on Windows NT and I am considering moving this onto Linux. It's been written in C++ and can be found at http://www.scadaengine.com
If I adopt the same principle, then you could use the PLC as a gateway as well as a controller.
If anyone thinks it might be useful, then let me know and I'll try and move my code over.
Chris
_______________________________________________
LinuxPLC mailing list
[email protected]
http://linuxplc.org/mailman/listinfo/linuxplc