Bently Nevada Sensors


Thread Starter


Dear All,

Can anyone confirm whethere Bently Nevada Sensor can be compatible with SKF M800A series Monitors.

Thanks in Advance.

Control System Engineer
Saudi Arabian Bechtel Co.
P.O. Box 1840, Al Khobar 31952
Kingdom of Saudi Arabia
*Tel. (966-3) 882-5288 Ext. 1707
*Fax. (966-3) 882-5234
*E-mail: [email protected]

Zyad Al-Irhayim

Hi Ravi
The M800A system is compatible to BNC sensors as the M800A is a digital system. That means the sensitivity of the BNC probes can be programmed in the M800A.

The M800A will send -24VDC to the BNC sensor and will in return recieve a signal (mV) from the probe and that will be scaled and processed at the M800A. We have many Saudi Sites that have M800A systems with BNC sensors and vice versa.

For any further information please contact me.

Best Regards
Zyad Irhayim
KSA SKF DYMAC resident Eng
TEL : +966 3 882 2299
Fax : +966 3 882 7027
[email protected]