Citect Alarm Redundancy and Alarm logging to Standby system problem


Thread Starter

Mahsa Rassoulzadeh

Hi every one,

I'm using Citect SCADA v7.2 SP2 with 2 x redundant Citect Servers. I'm using dbf device for alarm log purpose.

When primary is disconnected from network. Standby server does not continue alarm logging. I also changed: SessionKeepAlive: REG_DWord = 60000 based on Citect KB:Q4218 but nothing happened.

When I shut down standby server and run it again, when primary server is still disconnected from the network, it logs alarm data.

Any help is highly appreciated.