Communication between Honeywell TPS and Siemens S7 PLC

R

Thread Starter

River70

Has anybody experience to exchange the information between Honeywell TPS system and Siemens S7 PLC?

I feel OPC or Ethernet connection may solve the problem. But there's no project reference on the Web.

River70
Singapore
 
OPC should solve this problem. There are several OPC Server packages for the Siemens S7. Here is one from Kepware: http://www.opcsource.com/Spec_Sheets/Siemens_S7_200300400_TCPIPEthernet.html

Then you need an OPC client from Honeywell. Ask your Honeywell rep.

Generally, you need an Ethernet TCP/IP connection on both systems so that they are part of the same network. The OPC server and client both will run in a single PC, typically the HMI, attached to the TPS system via the same Ethernet network.

Dick Caro
 
Top