M
We are researching a way to set the communication between the PC677 from Siemens and the old PLC Siemens S5 CPU 945 115U.
PC677 Siemens -> there is a port MPI/Profibus available.
PLC -> there is only the configuration port available.
We will use a Supervisory Program to read some data from the PLC.
We couldn't find the cable required.
PC677 Siemens -> there is a port MPI/Profibus available.
PLC -> there is only the configuration port available.
We will use a Supervisory Program to read some data from the PLC.
We couldn't find the cable required.