communication between siemens PLC S7-400 to DCS Centum CS3000R3

V

Thread Starter

V K GUPTA

We have SIEMENS PLC S7-400 In redundant system and its MPI port connected to one SCALANCE Card to connect any laptop. Now we want to communicate all data on Yokogawa DCS CS3000R3 on ethernet network.

Please suggest if any possibility of communication between Siemens Scalance card to DCS ethernet switch.
 
you need to use Siemens CS-3000 module to convert your signal to modbus TCP/IP signal and interface with yokogawa.
 
Top