Control

Communication between Triconex PLC and Matrikon OPC Server Using TCM Module

R

Thread Starter

rbhadani

Hi Guys,

Facing issue Communicating between Triconex PLC and Matrikon OPC server using TCM Module. Configuration looks to be correct in the matrikon OPC server side but when I subscribe for SOE (A&E) events in the MatrikonOPC Explorer i get only a HW failure warning/error (The redundant comm module has stopped. switching over to the failover module).

SOE events coming up correctly in Tristation.

Any suggestions?
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
LamijaZ Communication between ABB RTU530 and Siemens 7SJ62 using IEC 60870-5-103 protocol General Automation Chat 0
D ModBusTCP communication between ABB AC800M CI867 and Schneider P3U30 Modbus 0
Wahidulislam Siemens SPPAT3000 flickers the communication between 3 io modules of a rack Distributed Control Systems - DCS 0
frd1982 establish communication between ABB CI854 and IM153-2 ( redundant) Distributed Control Systems - DCS 1
O Establish Modbus communication between ALTIVAR630 from Schneider Electric and RSTi-EP CPE100 standalone PLC from Emerson Modbus 0
Similar threads
Communication between ABB RTU530 and Siemens 7SJ62 using IEC 60870-5-103 protocol
ModBusTCP communication between ABB AC800M CI867 and Schneider P3U30
Siemens SPPAT3000 flickers the communication between 3 io modules of a rack
establish communication between ABB CI854 and IM153-2 ( redundant)
Establish Modbus communication between ALTIVAR630 from Schneider Electric and RSTi-EP CPE100 standalone PLC from Emerson

You May Also Like

Top