I have replaced a Schneider Premium PLC with a M580, I have Intouch SCADA 2014R2SP1 with OI-MBTCP G.1. I have done this several times before without problems. But when I did this today Input registers do not work, Holding registers work.
Must be some incompatibility between the new M580 CPU (firmware SV03.20) and the OI-server, or maybe incorrect configuration?
I have tried to alter block I/O size.
Any quick fix? (I don´t have time to upgrade intouch)
Regards
Must be some incompatibility between the new M580 CPU (firmware SV03.20) and the OI-server, or maybe incorrect configuration?
I have tried to alter block I/O size.
Any quick fix? (I don´t have time to upgrade intouch)
Regards