K

DISTRIBUTION BLOCK.FROM THE DISTRIBUTION BLOCK I AM GOING TO EIGHT 3 POLE FUSE BLOCKS.SHOULD THE SIZE OF THE WIRE BETWEEN THE DIST. BLOCK

AND THE 3 POLE FUSE BLOCKS BE SIZED FOR 110 AMPS OR JUST THE AMOUNT OF AMPS THAT IS DETERMINED BY THE FUSE ON THE 3 POLE FUSE BLOCK.OR IS

THERE SOME OTHER RULE.THE DISTANCE BETWEEN ANY OF THESE POINTS IS LESS THAN 10 FT IF THAT MATTERS.EVERYTHING IS IS ONE BOX.THANKS FOR ANY

HELP