Configuring BMXNOR0200H Module as DNP Slave at Different TCP Ports

C

Thread Starter

chauhandinesh

We are using Schneider M340 PLCs with BMXNOR0200H modules for DNP communications. Main SCADA is polling the module (module is configured as DNP Slave) on port 20000 for which data mapping is created in NOR Module.

We want to poll the same module through a different SCADA system using 20001 port. As per module's manual, Module support connection with max 4 DNP Clients but all should have same datamap.

Is it possible to configure different datamap for different channels in NOR Module?
 
Top