S
There is 3 individual machines with s7 300 siemens
plc. We want to make one scada system (and workstations) to all machines (not individual scadas)
-----------------
machine #1
s7 300 cpu 316-2-dp siemens plc
20 profibus slaves (drivers and et200 modules)
1 pc (connected with mpi port to the plc)
------------------
machine #2
s7 300 cpu 315-2-dp siemens plc
NO profibus slaves
1 pc (connected with mpi port to the plc)
---------------------
machine #3
NO plc (but there is a lot of et200l sc)
40 profibus slaves (drivers and et200 modules)
1 pc(a) connected to profibus
1 pc(b)connected to pc(a) with ethernet
------------------------------------------
Can you help us about
1-how can we connect these plc's on same network
2-various network type's,
3-hardware requirements,
4-software requirements.
Note: we want to use opc server at first but it
can be change. And can we do this with a prog.
language (example:delphi) instead of scada.
Because there is too much client workstations.
I think one solution is;
1 pc with 3 profibus pci card,
1 opc server (1 or more ?) for profibus dp
1 scada sever (which one genesis?) or if possible
delphi
is this solution works?
what is your different ideas?
what is the inexpensive way configuration?
what is the most powerfull way conf.?
suleyman igde
[email protected]
thanks
plc. We want to make one scada system (and workstations) to all machines (not individual scadas)
-----------------
machine #1
s7 300 cpu 316-2-dp siemens plc
20 profibus slaves (drivers and et200 modules)
1 pc (connected with mpi port to the plc)
------------------
machine #2
s7 300 cpu 315-2-dp siemens plc
NO profibus slaves
1 pc (connected with mpi port to the plc)
---------------------
machine #3
NO plc (but there is a lot of et200l sc)
40 profibus slaves (drivers and et200 modules)
1 pc(a) connected to profibus
1 pc(b)connected to pc(a) with ethernet
------------------------------------------
Can you help us about
1-how can we connect these plc's on same network
2-various network type's,
3-hardware requirements,
4-software requirements.
Note: we want to use opc server at first but it
can be change. And can we do this with a prog.
language (example:delphi) instead of scada.
Because there is too much client workstations.
I think one solution is;
1 pc with 3 profibus pci card,
1 opc server (1 or more ?) for profibus dp
1 scada sever (which one genesis?) or if possible
delphi
is this solution works?
what is your different ideas?
what is the inexpensive way configuration?
what is the most powerfull way conf.?
suleyman igde
[email protected]
thanks