Usually I use S7-200 Siemens with TD-200 Touch display. Now I need to connect the TD-200 with mitsubishi FX2N series. In S7-200 I usually use M (memory) in S7-200 to read the TD-200, how about in FX2N?

thanks and best regards

Ghany

 

The TD200 was designed to be used with S7-200 and to be programmed with Step7 MicroWin. The messages are contained in the PLC, not the TD200. It is not a multi PLC display, it does not have drivers available for different PLC comm protocols. You may want to take a look at the TD17. It has support for the FX PLC from Mitsubishi. Be aware that it will require one of the ProTool software packages to program.

Thank you,

David Adams
Application Engineer
CONTROL PRODUCTS
[email protected]
334-567-2017 office
334-567-8614 fax
334-303-9499 cell

 

Thank for your reply David,

I am sorry I made mistake, yes you are right it can not be connected with TD200, I mind with TD17.

I do have the ProTool software, but I still have problem to program the TD17 to the FX2N. Please help me David - URGENT

Regards

Ghany