D Thread Starter Dileep Miskin Apr 15, 2010 #1 I want to convert Modbus slave data to DH485. Please suggest the required third party maodule Regards Dileep
I want to convert Modbus slave data to DH485. Please suggest the required third party maodule Regards Dileep
R RussB Apr 16, 2010 #2 http://www.redlion.net/Products/HumanMachineInterface/DataStationPlus.html OR http://www.redlion.net/Products/ProcessControl/CommunicationModules/Ethernet/ICM8.html
http://www.redlion.net/Products/HumanMachineInterface/DataStationPlus.html OR http://www.redlion.net/Products/ProcessControl/CommunicationModules/Ethernet/ICM8.html
W Wassim Daoud Apr 19, 2010 #3 You may wanna use OPC for that. Here is an OPC Server for your DH485: http://www.matrikonopc.com/opc-drivers/opc-Allen-Bradley/base-driver-details.aspx and here is an OPC server for your Modbus device: http://www.matrikonopc.com/opc-drivers/opc-modbus/base-driver-details.aspx Then use OPC Data Manager to link then together: http://www.matrikonopc.com/products/opc-data-management/opc-data-manager.aspx Cheers, Wassim Daoud Global Solutions Architect www.MatrikonOPC.com
You may wanna use OPC for that. Here is an OPC Server for your DH485: http://www.matrikonopc.com/opc-drivers/opc-Allen-Bradley/base-driver-details.aspx and here is an OPC server for your Modbus device: http://www.matrikonopc.com/opc-drivers/opc-modbus/base-driver-details.aspx Then use OPC Data Manager to link then together: http://www.matrikonopc.com/products/opc-data-management/opc-data-manager.aspx Cheers, Wassim Daoud Global Solutions Architect www.MatrikonOPC.com
A Adrienne Lutovsky Apr 19, 2010 #4 Hello Dileep, Try this: http://www.prosoft-technology.com/content/view/full/7172 ProSoft Technology DH-485 to Modbus Master/Slave Gateway (5102-DH485-MCM3) ProSoft Technology also has a Modbus TCP/IP and Modbus Plus gateways to DH485 protocol.
Hello Dileep, Try this: http://www.prosoft-technology.com/content/view/full/7172 ProSoft Technology DH-485 to Modbus Master/Slave Gateway (5102-DH485-MCM3) ProSoft Technology also has a Modbus TCP/IP and Modbus Plus gateways to DH485 protocol.
E Erik Apr 19, 2010 #5 you could use a ProLinx 5102-dh485-mcm3 module for this. The module has 4000 registers of data that is shared between the DH485 driver and the Modbus drivers. If there are any questions please contact us at support [at] prosoft-technology.com Thanks.
you could use a ProLinx 5102-dh485-mcm3 module for this. The module has 4000 registers of data that is shared between the DH485 driver and the Modbus drivers. If there are any questions please contact us at support [at] prosoft-technology.com Thanks.
