Converter from Daniels ASCII Modbus to RTU Modbus

L

Thread Starter

lalo_37

I need to send via wireless 20 registers from a cromatograph (chandler model 2920) to a ControlLogix 1756-L63. We bought 3 wireless gateway from weidmüller 2 Modbus gateways (one Master connected to the cromatograph an the other as a repeater) and an ethernet gateway to connect it to the PLC. The problem is that the gateway connected in the cromatograph side just support RTU Modbus in standar format and the cromatograph only supports ASCII Modbus in Daniels format. The registers I want to send start in 7000 until 7020. I don´t know how to convert those registers in standar Modbus RTU, because I know that those registers are in floating point. Could you give me some suggestions?
 
Hi,

www.fieldserver.com can offer you a solution from Modbus Daniels to Modbus RTU or Modbus Daniels to EtherNet/IP directly into ControlLogix. Give them a call and I am positive they can assist you.

Regards,

Richard
 
Top