Control

Converting Vijeo Look App into Vijeo Designer for XBT -G series

R

Thread Starter

Rohit Mittal

Can we convert an application developed in the VIJEO LOOK 2.5 (SCADA) into the Vijeo Designer application or the software used for the XBT-G display? If possible then please guide me to do the same.
 
V

Versaltec

VIJEO LOOK 2.5 and Vijeo-Designer have different usages. Vijeo-Look is a SCADA running on PC (iPC) where Vijeo-Designer is a graphical Operator Terminal.

Vijeo-Look have features dedicated to scada application that Vijeo-designer do not support directly. Thus the Vijeo-Look application need to be reworked to be usable on Vijeo-Designer. It do not exist today a way to convert a Vijeo-Look application to a Vijeo-Designer one.

If you need some help or some support, please contact Versaltec at [email protected]. We can help you to get success with Vijeo-Designer.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
DGlen90 Converting a chest freezer into a cold plunge General Automation Chat 0
E After effects of Converting An application from PL7 pro platform to Schnieder EcoStructureControl Expert Programmable Logic Controller - PLC 2
A Converting Siemens APACS PID Tuning to Rockwell Control Logix Programmable Logic Controller - PLC 0
T Converting from %Weight to g/L General Automation Chat 5
H Converting COD of Kg/day into mg/litre General Automation Chat 4
Similar threads
Converting a chest freezer into a cold plunge
After effects of Converting An application from PL7 pro platform to Schnieder EcoStructureControl Expert
Converting Siemens APACS PID Tuning to Rockwell Control Logix
Converting from %Weight to g/L
Converting COD of Kg/day into mg/litre

You May Also Like

Top