Hi Gets

When using Coriolis mass flow meters to measure liquids flow oil with entrained GAS from the well productions , the meter reports inaccurate readings. Entrained Gas gives inaccurate reading comparing to metering system, as the entrained maybe absorbs some of the energy. The energy is limited by intrinsic safety requirements and therefore cannot be increased.

Any advise are welcome

 

You might see if you can glean any advice from Emerson's white paper on the issue:

https://www.emerson.com/documents/a...s-of-two-phase-flow-micro-motion-en-66308.pdf

 

Thank you David