Control

Current amplifier required

A

Thread Starter

Alvaro Rodriguez

Hello world !

We are looking for a current amplifier. We need to control a vibrator coil with an output board from a PLC, via a pulse train. It is a solid state 24Vdc output, that can handle only 0.5Amp; the coil requires at least 1.5Amp.

Any suggestions ?
 
J

Jason Greenstreet

My current employer had the same problem until we finally decided on opto-isolators. Need more info? contact me.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M Check Valve Impact on Motor Blower Current Control Valves 8
leVanw I don't know if the capacitance of a capacitor is large, the capacitor will discharge with a larger current than other capacitors with the same voltag Electrical Engineering 9
Polash Neutral Current is too much high Power Generation 3
AF878 2 Wire Active Current loop 45mA Schematic General Communications Chat 1
T ABB ACS 800 Drive Overload setting and Over current limit setting. Electrical Engineering 10
Similar threads
Check Valve Impact on Motor Blower Current
I don't know if the capacitance of a capacitor is large, the capacitor will discharge with a larger current than other capacitors with the same voltag
Neutral Current is too much high
2 Wire Active Current loop 45mA Schematic
ABB ACS 800 Drive Overload setting and Over current limit setting.

You May Also Like

Top