DCS to Serial device connectivity

A

Thread Starter

Alok

I have an application wherein I have to connect two Weighbridges (addressed as 01 and 02 resply) via a proprietory protocol (Serial
RS232C).
I have to send one of the available 8 queries at regular intervals selectively to the two units and update the data received onto my MIS.
I shall be using DeltaV DCS for the plant control and have been asked to use the DCS serial connectivity cards / modules available for this
connection also. Seperate cards on PC's are not acceptable to the client.
Can any one suggest whether the same is possible in DeltaV? I have tried the website in vain.
Regards


Alok
 
W

Wade Carlson

Try www.comtrol.com for RS-232C to Ethernet interface modules as an option.

--------------------------------------------------
T.W.(Wade) Carlson, P.Eng.
Senior Instrumentation & Control Engineer
System Manager, Engineering Services
System Administrator, Shand Project Data Handling System
Instrumentation & Control Department
Engineering Services Division
Power Production Business Unit
SaskPower Corp.
2025 Victoria Ave.
Regina, Saskatchewan
Canada S4P 0S1
Tel# 306-566-3220
Fax# 306-566-3219
internet email [email protected]
--------------------------------------------------
 
Top