R
I'm hoping that someone on our list with experience in the process control
field can suggest a reasonably inexpensive method of determining the
density of a seawater and ice slurry in a mixing tank. It is not a batch
mixing application, so the tank level is variable and I cannot just
measure the load on the mixer motor. Fortunately, ballpark accuracy is
acceptable. We just need to make sure the slurry is not too thin or
thick, and that it is well mixed before we pump it to the use point.
TIA
Richard Gue
Controls Engineer
North Star Ice Equipment Corp.
Seattle, WA
(206) 763-7300 voice
(206) 763-7323 fax
field can suggest a reasonably inexpensive method of determining the
density of a seawater and ice slurry in a mixing tank. It is not a batch
mixing application, so the tank level is variable and I cannot just
measure the load on the mixer motor. Fortunately, ballpark accuracy is
acceptable. We just need to make sure the slurry is not too thin or
thick, and that it is well mixed before we pump it to the use point.
TIA
Richard Gue
Controls Engineer
North Star Ice Equipment Corp.
Seattle, WA
(206) 763-7300 voice
(206) 763-7323 fax