F
This is a tough cookie, only for the real nerds.
I have to derive 2 separate signals from a mixed signal source, pref, without timing comps such as R-C because the frequency is not always given.
The signal comprises of 3 stages:
off,
on,
and/or pwm with 20% DC (12V)
I would like to output 2 independent signals,
according to the following pattern;
off (0V) = both outputs off
12VDC(high) = output 1 high
PWM appr.50-100Hz 20% DC = output 2 high
Both outputs must act independently.
I hope someone can give a few good pointers.
Thanks in advance.
I have to derive 2 separate signals from a mixed signal source, pref, without timing comps such as R-C because the frequency is not always given.
The signal comprises of 3 stages:
off,
on,
and/or pwm with 20% DC (12V)
I would like to output 2 independent signals,
according to the following pattern;
off (0V) = both outputs off
12VDC(high) = output 1 high
PWM appr.50-100Hz 20% DC = output 2 high
Both outputs must act independently.
I hope someone can give a few good pointers.
Thanks in advance.