A
Dear List:
I have 6 Thermocouples type K to a PLC. 13 Meters of Extension wire and 40 Meters of cupper wire to PLC (Maximun distance). The PLC receives the mV
signals with an analogue card for thermocouples. Is there any problem with this signal in this distance ? (there are 6 motors 3HP everyone but 3 meters is the nearest motor of the thermocouples (the extension wires not run through these motors and the cupper wires less)).
Thank You for your attention.
Alberto Maldonado
Mail:[email protected]
I have 6 Thermocouples type K to a PLC. 13 Meters of Extension wire and 40 Meters of cupper wire to PLC (Maximun distance). The PLC receives the mV
signals with an analogue card for thermocouples. Is there any problem with this signal in this distance ? (there are 6 motors 3HP everyone but 3 meters is the nearest motor of the thermocouples (the extension wires not run through these motors and the cupper wires less)).
Thank You for your attention.
Alberto Maldonado
Mail:[email protected]