A
Dear List:
We have an Old Furnace to temper metal sheet at 500 Fahrenheit Degree. This Furnace has a "dual Valve" it means 1 Valve for the Gas and Another for the Air to Mix both of them at the Burner. They are mechanically linked with a range appropiated and determined with the practice, for every Valve. I ask if there is another technology to control every Valve independently or in another way could we use a servomotor for this application ?, I think that the curve Aperture
versus constant mixed gas flow gives not a good burning maybe can shut off the flame.
Thank You for your Attention.
Mr. Alberto Maldonado
E-Mail: [email protected]
We have an Old Furnace to temper metal sheet at 500 Fahrenheit Degree. This Furnace has a "dual Valve" it means 1 Valve for the Gas and Another for the Air to Mix both of them at the Burner. They are mechanically linked with a range appropiated and determined with the practice, for every Valve. I ask if there is another technology to control every Valve independently or in another way could we use a servomotor for this application ?, I think that the curve Aperture
versus constant mixed gas flow gives not a good burning maybe can shut off the flame.
Thank You for your Attention.
Mr. Alberto Maldonado
E-Mail: [email protected]