Looking to implement an Anybus communication interface between an Atlas Copco Elektronikon and a Controllogix PLC. HMS has an Anybus gateway product that connects CANbus to any of the following: Modbus/RTU, Modbus/TCP, and Ethernet/IP. There are others, but these are the one's I'm primarily interested in.

 

Hi, I am also interested in this.

I want to connect our Atlas copco compressor to our Modbus Client.

Please let me know if you have any improvement on this

Regards,Sajid
[email protected]

 

Looking to implement an Anybus communication interface between an Atlas Copco Elektronikon and a Controllogix PLC. HMS has an Anybus gateway product that connects CANbus to any of the following: Modbus/RTU, Modbus/TCP, and Ethernet/IP. There are others, but these are the one's I'm primarily interested in.

Did either of you figure this out?