Exchanging Data from Data Gateway ADAM 4571 by S7-300


Thread Starter


Hi everyone,

I have three hardwares: PLC S7 300 (CPU 317-2DP & CP 343), ADAM 4571 (data gateway, 1 port ethernet to RS485); and HMI software WinCC 7.4

I want to use ADAM 4571 to exchange data from Advantech I/O Module to PLC S7-300, and read the data in WinCC.

So I would like to have your opinion and any solution on this config. Also any document showing the basic like how to read data from Ethernet network.

Thank you in advance.