C
Hi All,
I need to fill 1000 ltr of water to water tank and when it was reached to 1000 ltr, the water pump which has flow 3 m3/h should stop and to make sure the water is 1000 ltr, I must measure it with digital display and should read 1000 ltr of water on display. At present I use the system of flow as below,
* Burkert Paddle Wheel Flow Transmitter Model 8025, Size 1" *
Burkert Batch Controller Model 8600 with operator unit Model 1077-1
which installed and connected directly to solenoid valve (plug in direct to solenoid valve)
* Burkert 2/2 way solenoid valve Model 406 with diameter 1"
which will shut if the volume of water is reached to 1000 ltr and the display controller read 1000
The problem I face is the volume of water is not meet with the display when I measure it. For example, I set the controller 100 but the water I measured is not 100 ltr but 101,3 ltr and when I set to 1000 the water I measured is 1030 ltr not 100 ltr and be advised the accuracy I need should be less than 1%. If anybody knows, how to solve it please let me know or perhaps I must change the brand. Looking forward to hearing from you soon and thank you.
Sorry for my poor english.
Kindly regards,
Harijanto
I need to fill 1000 ltr of water to water tank and when it was reached to 1000 ltr, the water pump which has flow 3 m3/h should stop and to make sure the water is 1000 ltr, I must measure it with digital display and should read 1000 ltr of water on display. At present I use the system of flow as below,
* Burkert Paddle Wheel Flow Transmitter Model 8025, Size 1" *
Burkert Batch Controller Model 8600 with operator unit Model 1077-1
which installed and connected directly to solenoid valve (plug in direct to solenoid valve)
* Burkert 2/2 way solenoid valve Model 406 with diameter 1"
which will shut if the volume of water is reached to 1000 ltr and the display controller read 1000
The problem I face is the volume of water is not meet with the display when I measure it. For example, I set the controller 100 but the water I measured is not 100 ltr but 101,3 ltr and when I set to 1000 the water I measured is 1030 ltr not 100 ltr and be advised the accuracy I need should be less than 1%. If anybody knows, how to solve it please let me know or perhaps I must change the brand. Looking forward to hearing from you soon and thank you.
Sorry for my poor english.
Kindly regards,
Harijanto