Control

Flash Memory Card for Panelview

S

Thread Starter

S. Broadhead

Does anyone know of a software or card reader which will allow me to upload/download panel builder 1400 (pvc) files to the non ATA memory cards used in panelviews? When I insert this type of card in my notebook it is not recognized.
 
A

Alan Rimmington

The card you are using must be a DataBook TMB240 or TMB250. The only information I have on these cards is "they cannot be setup in Windows
95 Control Panel. Follow instructions DataBook User's Guide for details of how to install the card drive." If your Panelview firmware is
3.0 or later you could use an ATA card. I have done this with a 8MB CompactFlash card in a CompactFlash to PC Card Adaptor. I recently tried
a 16MB card but the Panelview didn't like it. Main advantage of these cards is the speed of download.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
D PLC Flash Memory automatically erasing Programmable Logic Controller - PLC 2
N Flash Memory failing in smart sensors? Sensors & Calibration 4
M Flash memory card in S7 CPU 414H - volatile or nonvolatile Programmable Logic Controller - PLC 1
R Quantum CPU 140 434 12 flash memory problem Programmable Logic Controller - PLC 2
R Erasing Quantum Flash Memory Programmable Logic Controller - PLC 3
Similar threads
PLC Flash Memory automatically erasing
Flash Memory failing in smart sensors?
Flash memory card in S7 CPU 414H - volatile or nonvolatile
Quantum CPU 140 434 12 flash memory problem
Erasing Quantum Flash Memory

You May Also Like

Top