Ge Fanuc PLC communication with Rockwell SCADA

A

Thread Starter

arun

I am using a GE Fanuc Versamax E05 PLC and a Rockwell Factory Talk View SCADA on a TCP-IP network.

How I can communicate the PLC with the SCADA?

Is there any communication driver available for this purpose?

Is there any possibility for a modbus TCP-IP communication?
 
The VersaMax CPUE05 has two Ethernet Protocols EGD and SRTP, both GEIP proprietary on its port 3 Ethernet port.

The port 2 15 pin RS-485 does have the modbus protocol available client and server.
 
S
There is an OPC Server built in to Proficy Machine Edition (the development sw used to program the versamax). No runtime license required.
 
Top