Has anyone used CoDeSys in U.S.A

R

Thread Starter

Ron

I am looking for PLCs that are used regulary and available in the U.S. that can be programmed with CoDeSys software. its for training use in a school. I picked CoDeSys because it uses all 5 IEC languages and it works rather well. i would also be willing to use its softPLC function and Remote I/O if anyone is aware of that type of hardware.

thanks,
ron
 
R

Robert Holman

Ron,

Wago. The Wago line of PLCs and PFCs (Programmable Fieldbus Couplers) are programmed using CoDeSys software.

Regards,
Robert Holman
Automation & Controls Engineering, Ltd.
 
J

Jeremy Pollard

Many vendors have chosen 3S for their programming platform ...Wago for one.
...They would be happy to help I'm sure as would any other vendor that you might hear from...

Most would private label the software.

Cheers from: Jeremy Pollard, CET The Caring Canuckian!
www[.]tsuonline.com

Control Design www[.]controldesignmag.com
Manufacturing Automation www[.]automationmag.com

PLCopen North America - [email protected]
www[.]plcopen.com
 
M
B

Bernie Wasserman

The Moeller Electric line of PLCs, Xsystem and the new EASY products support CODESYS are available world wide.

Bernie
 
J

Jeremy Pollard

As does Wago and others..

Cheers from: Jeremy Pollard, CET The Caring Canuckian! www[.]tsuonline.com

Control Design www[.]controldesignmag.com Manufacturing Automation www[.]automationmag.com

PLCopen North America - [email protected]
www[.]plcopen.com

3 Red Pine Court, RR# 2 Shanty Bay, Ontario L0L 2L0 705.739.7155 Cell # 705.725.3579
 
Top