Help Connecting to Modicon Quantum Processor using Concept over Modem.

Has anybody done this. What are the tricks? I can't seem to find modem init string setup in the concept modbus/rs232 setup area.

Steven Landau
VP Controls & Automation
SPEC Process Engineering and Construction, Inc.
17 A Street
Burlington, MA 01803
Phone: (781) 221-0123
Fax: (781) 221-7212

email: [email protected]
Stoneham, MA 02180
T. 7814383337
F. 7814385297
Concept doesn't support a modem communication internally. You have use an external program like Windows Phone Dialer to make the connection, and then tell Concept to use the Modem's serial port and comm parameters. Just make sure the program you use to connect doesn't take exclusive control of the port. Windows phone dialer and HyperTerminal don't, so they should work fine. Hopefully they will add modem support internal on next version of Concept. It's a pain to do it this way.

Fernando Capelari - Schneider Electric B

I am going to send you by email a technical resolution from Modicon that explains how to do that.