Help! Keyence CV5000-controllogix ethernet/ip communication


Thread Starter


Has anybody been able to control a CV5000 vision system using commands via ethernet/ip with explicit message instructions, or by any other mean using a controllogix controller.

I have tried everything indicated on the CV manual but it won't just work, I don't know what I am missing.

Any help will be appreciated.

Doug Kurzynski

We (Keyence) do have a setup guide for EIP, separate from the CV manual, that may help offer you some guidance. If you are interested in this, let me know.

Doug Kurzynski / Keyence Corp. of America
dkurzynski [at]

You can also call our technical support line at 888-539-3623, option 3 if you have questions on the CV.