How can I use the Microchip PIC16C54 as a pulse width timer

  • Thread starter James Allan Ventura
  • Start date
J

Thread Starter

James Allan Ventura

Hi, I want to use the Microchip PIC16C54 as a pulse width timer. How do I start? This will be used to control a Futaba S9101 servo which needs an input signal of 1.5 ms pulse width every 20 ms. Thanks for any input, James
 
James, If you haven't found a solution already you might like to look at the Microchip website. There are several app. notes on the subject. Also if you look on the web you'll find several remote control applications that do exactly what you want to do. The Microchip discussion site is a good starting point. Hope this helps, and good luck, Rick
 
Top