I/O Server Design

J

Thread Starter

john finn

Does anybody know where i can get good information on how to design my own I/O server using InTouch and FactorySuite 2000.
 
G
John,

If you are planning to develop an IO server, I would recommend that you create an OPC server rather than tie yourself to the framework of one
particular HMI package. There are several OPC Server Toolkits available that will greatly expedite this effort. Northern Dynamic has a fully functional trial version available for download from our web site (see URL below). OPC toolkits are also available from Factorysoft and Iconics, to name a couple.

Best regards,
Gord Ellis

===========================================
Gord Ellis, P.Eng.
Northern Dynamic Inc.
J103-155 Frobisher Drive
Waterloo, Ontario
Canada N2V 2E1
Tel/Fax: (519) 725-2071/2072
www.nordyn.com
 
There is an IO development Toolkit within FS2000.
Any WW distributor can help you access it.
 
Top