Yes...
that´s all...

the summary tells every thing....

Does any one know where to find info about ICCP protocol?

 

Dear João,

you wrote:
> Does any one know where to find info about ICCP protocol?

Please check the following links.

ICCP (Inter-control center communications protocol) is the synonym for the IEC Standard 60870-6-502 (-803), also known as TASE.2.

IEC TC 57 (WG 07) has published the standard in 1997. TASE.2 is THE standard for communications between control centers.

Information can be found at:
"www.nettedautomation.com/standardization/IEC_TC57/WG07/index.html":http://www.nettedautomation.com/standardization/IEC_TC57/WG07/index.html

TASE.2 is part of the UCA (tm) -- Utility communications architecture:
"www.nettedautomation.com/standardization/IEEE_SCC36_UCA/index.html":http://www.nettedautomation.com/standardization/IEEE_SCC36_UCA/index.html

Comparison of IEC 60870-5-101/-103/-104, DNP3,
and IEC 60870-6-TASE.2 with IEC 61850:

"www.nettedautomation.com/news/n_51.html":http://www.nettedautomation.com/news/n_51.html

UCA (tm) has been used as major input for the new standard IEC 61850 (communication within and with substations):

"www.nettedautomation.com/standardization/IEC_TC57/WG10-12/index.html":http://www.nettedautomation.com/standardization/IEC_TC57/WG10-12/index.html

Hope that helps!

I was member of the IEC TC 57 WG 07. At this time I am involved in the
publication of IEC 61850.

Have fun!

Best Regards,
Karlheinz Schwarz
[email protected]

 

You can get technical information on ICCP (IEC60870-6 TASE.2) from:
"http://www.sisconet.com/techinfo.htm":http://www.sisconet.com/techinfo.htm

Contact me directly if I can be of any help to you.

Best Regards,

Ralph Mackiewicz
SISCO, Inc.
6605 19-1/2 Mile Road
Sterling Heights, MI 48314-1408 USA
T: +586-254-0020 F: +586-254-0053
mailto:[email protected] http://www.sisconet.com
***PLEASE NOTE NEW AREA CODES***