R
Hi all,
I have a installation that requires a pH probe to be dry for 6 months of the year. I have been told a gel cell pH probe can withstand exposure to the air for long periods of time (Takes about 15min to
stabilise after wetting). Anyone know if this is an acceptable practice? Or another solution? (There is no water available at the site)
Regards,
Richard
Alesa Alusuisse Engineering Australia Pty Limited.
Phone: +61 7 3218 3555
Fax : +61 7 3236 0155
Email: [email protected]
Web : http://www.alesa.com.au
I have a installation that requires a pH probe to be dry for 6 months of the year. I have been told a gel cell pH probe can withstand exposure to the air for long periods of time (Takes about 15min to
stabilise after wetting). Anyone know if this is an acceptable practice? Or another solution? (There is no water available at the site)
Regards,
Richard
Alesa Alusuisse Engineering Australia Pty Limited.
Phone: +61 7 3218 3555
Fax : +61 7 3236 0155
Email: [email protected]
Web : http://www.alesa.com.au