Ladder logic samples for ControlLogix or SLC500

A

Thread Starter

Anibal Hernandez

Gentlemen:

I'm starting to work on PLC's from AB, specially the SLC 500 and the ControlLogix series, I came from programming PLC's from PLCDirect by Koyo and found them very different.

Do you know of any website where I can download some Ladder Logic samples made for the ControlLogix or the SLC 500. Perhaps with comments within the code.

Thanks a lot.

Sincerely
Mr. Andy Hernandez

[email protected]
[email protected]

Tel. 787-268-6927 / Car. 787-402-0974

Postal Address:
PISCIS AUTOMATION CO.
Po Box 9066620 San Juan
Puerto Rico 00906-6620
 
B

Bill Simpson

Hi Andy,

Take a look at the "PLC Programming Command Guide" web site
(http://www.fortunecity.com/skyscraper/patch/1035/index.html)
It's a new (RSLogix) site but they're moving along quickly, have a lot of good info and have already started posting some example programs.

If your interested in getting a feel for RSLogix and don't have a PLC at your disposal, I have a beta download of a RSLogix simulator I'm working on (LogixPro) which you can download for free at (http://TheLearningPit.com). It doesn't simulate all the aspects of a PLC, but it's pretty darn close to RSLogix as far as the editor and programming goes. Comes with a process simulations package which really adds a bit of fun and challenge for the would-be programmer.

best of luck, Bill
 
Andy, I have a nice program with documents which runs a bin shuffler system. let me know if u want the project file. very well documented. vic

 
Top