Hi everyone

Can any one suggest how to communicate with Tejas CAM DAC 16 RTU with Series 3 protocol. This RTU is made in the seventies and is using a proprietary modem (FSK 1200K) to communicate with Front end processors (MTU's). We would like to retain these RTUs and use a modern OPC server or a gate way to poll these RTU's, Any ideas ?

Adel Abbaza

 

Please take a look at our Omnii-Comm product http://www.miille.com/din266-p00.pdf for a complete solution for your problem. This module supports both Tejas Series 3 and Series 5 protocols in both Master and Slave configurations.

For example, you can configure this module as a "Data Concentrator" that will provide the link between your new system and your existing system. Or, you can use this module at each remote site to make that location "appear" as a standard device, like Modbus for example.

There are many system configuration options that we can discuss. Please contact me at [email protected] for more information.

Thank you,

Jerry Miille

Miille Applied Research Co., Inc. http://www.miille.com/