P
Hi all,
I am involved in a project where the contractor is trying to interface iFIX to a LONWorks based building control system using Echelon's LNS and Innovex LON/OPC server. They are finding problems in getting the OPC point browser to work when inserting OPC points into iFIX and in controlling points from iFIX.
Does anyone have experience with this combination or has anyone successfully interfaced LONWorks/LNS to iFIX using another approach. Any
suggestions would be appreciated.
Regards
Peter Whalley
Managing Director
Magenta Communications Pty Ltd
121 King Street,
Melbourne, VIC 3000
Australia.
e-mail: [email protected]
I am involved in a project where the contractor is trying to interface iFIX to a LONWorks based building control system using Echelon's LNS and Innovex LON/OPC server. They are finding problems in getting the OPC point browser to work when inserting OPC points into iFIX and in controlling points from iFIX.
Does anyone have experience with this combination or has anyone successfully interfaced LONWorks/LNS to iFIX using another approach. Any
suggestions would be appreciated.
Regards
Peter Whalley
Managing Director
Magenta Communications Pty Ltd
121 King Street,
Melbourne, VIC 3000
Australia.
e-mail: [email protected]