M-bus to USB/RS-232 adapter to Convert M-bus to MODBUS

B

Thread Starter

brandons

Hi all,

I have been trying to configure a pulse to m-bus converter in order to interface MODBUS controller to a pulse output water meter.

In order to convert from m-bus to modbus, We are using a converter made by ADF HD67029M-485-80. Till now we have not managed to read modbus registers through ADF modbus to mbus converter. However it can be seen using the HD67031-B2-160 M-Bus Analyser by ADF.

I am looking to buy an m-bus to USB/RS-232 adapter in order to configure this pulse to mbus adapter (PadPuls 2 by Relay.de) using their software 'MBCONF'.

Do you recommend any specific adapters that are cost effective?

Regards,
Brandon
 
>I have been trying to configure a pulse to m-bus converter
>in order to interface MODBUS controller to a pulse output
>water meter.
>
>Do you recommend any specific adapters that are cost
>effective?

I have looked into the following products:
M-Bus - RS232 Converter by Anybus

http://www.anybus.com/products/products.asp?PID=495&ProductType=M-Bus Converter

M-Bus Micro-Master by Relay

http://www.relay.de/en/produkte/master/mikromaster.html

the following are made by ADF

Converter M-BUS / RS232:

HD67020-B2-3 - (up to 3 Mbus slaves)

HD67020-B2-10 - (up to 10 Mbus slaves)

Converter
M-BUS / RS232:

HD67021M-20 - (up to 20 Mbus slaves)

HD67021M-40 - (up to 40 Mbus slaves)

HD67021M-80 - (up to 80 Mbus slaves)

HD67021M-160 - (up to 160 Mbus slaves)

HD67021M-250 - (up to 250 Mbus slaves)

Converter
M-BUS / USB:

HD67024-B2-20 - (up to 20 Mbus slaves)

HD67024-B2-40 - (up to 40 Mbus slaves)

HD67024-B2-80 - (up to 80 Mbus slaves)

HD67024-B2-160 - (up to 160 Mbus slaves)

HD67024-B2-250 - (up to 250 Mbus slaves)

I really appreciate if you can give me some tips or maybe some feedback if you used a product from the above.

Regards,
Brandon
 
Top