A
We have frame 5-C, controlled by Mark 6 simplex.
We experience the following alarm diagostic alarm on VPRO Z:
The solenoid voltage 06 mismatch request state.
After check of the manual, we understand that this means that the trip solenoid number 3 feedback voltage is not matching with the reference status.
Please give the purposed causes and their purposed solutios.
Best regards
We experience the following alarm diagostic alarm on VPRO Z:
The solenoid voltage 06 mismatch request state.
After check of the manual, we understand that this means that the trip solenoid number 3 feedback voltage is not matching with the reference status.
Please give the purposed causes and their purposed solutios.
Best regards