We have Mark V controller. We have switched off the printer as it gives unnecessary logs. How can I see the contents in the print queue by <I> computer? Can I delete part of that and print only the alarms I need?

Thanks.

 

It's not possible to view the contents of the print queue.

If you have an <I>, exit to a command prompt and at the command prompt, type:

LOGGER FLUSH

If you have an HMI, open a command prompt window and type:

LOGGER

and select 'Flush'.

This command will delete the contents of the print queue (which can't be viewed on an <I> or an HMI).

On an <I>, if you type

LOGGER /?

you will get a help screen with some information about the other options of the Logger utility.

On the HMI, the Logger applet will provide some information about the functions available.

One thing to note: Logger cannot be easily set to execute each time the <I> or HMI is started.

You haven't said what is unnecessarily printing; is it nuisance Diagnostic Alarms? Is it nuisance or dithering Process Alarms? Is it SOE or EVENT data?