M
A friend in a food industry is asking advise regarding a mass flow sensor suitable for a tomato concentrate line. It seems that standard flow rate sensors are not reliable as the medium is not of constant density and may contain significant amounts of air. The pipe diameters are around 15 mm, medium temperature is 95 degrees C and nominal mass flow rate is 6 - 15 kg/min. The output signal is required to control the filling of containers (at 0.4 kg) at a minimum accuracy of 0.5 percent . The only mass flow sensors I have found up to now are very expensive for a small plant. Perhaps someone can provide some advise regarding possible solutions and suppliers. Regards Martin Cutajar